Learning to Use
Verastream® Host Integrator

To get the most benefit from this tutorial, review the following topics before you begin:

Creating a Host Integrator Application

Purpose: To produce a Host Integrator application.

You will work with a simulation of a 3270 (CICSAccts) host application and use Verastream tools and utilities to build a simple Host Integrator application.

You will complete these steps:

  1. Define the business needs for the project
  2. Develop the model requirements and map the data
  3. Build and deploy the model
  4. Create a Web Builder project
  5. Deploy the project to the enterprise

 

Ready to go?


1. Defining the Business Needs

Often the business needs of a project have already been defined before the development process ever begins. Although you may not have been a part of the decision, understanding the business problem is important to building a successful application.

In this CICSAccts project, the business goal is to make specific customer information available to users over the Internet and to other business processes by means of programmatic component interfaces. You will access the data through the CICSAccts application on a 3270 host.

To accomplish the goal you will:

  1. Automate the login to the host, retrieve the host data, and display the data in a simple Web application.
  2. Make available a Web service interface to the CICSAccts application that can be used by a developer to access customer information on the 3270 host.

 


2. Developing Model Requirements and Mapping the Data

Now that you understand the goal and the deliverables of the project, you are ready to use the Host Integrator Design Tool to build a model of the application. The model contains all the information required for host application navigation, screen recognition, data storing, and data retrieval.

During this phase, either working on your own or with someone familiar with the host application, you navigate through the application and document each host screen's inputs, outputs, navigation path, and other quirks. This results in a model requirements document that identifies the intricacies of each of the host screens that will be required to access the data.

The model requirements document contains two important features: the list of entities (unique host application screens) that need to be modeled, and a chart mapping the project data to the screen where the data will be retrieved.

In our application, in order to retrieve the necessary data, the main screen in the CICSAccts application needs to be treated as two distinct entities: One for input of information to do the search (Main) and one for output of the search (NameSearchResults). The output is a listing of information about each customer; this is the data that you need from the application.

This is a map of the data our model needs for inputs and outputs:

Attribute Name Used for Screen Screen Field Name
LastName input Main SURNAME
FirstName input Main FIRST NAME
AcctNum input Main ACCOUNT
RequestType input Main REQUEST TYPE
LastName output NameSearchResults SURNAME
FirstName output NameSearchResults FIRST
MiddleInitial output NameSearchResults MI
Title output NameSearchResults TTL
Address1 output NameSearchResults ADDRESS
AcctNum output NameSearchResults ACCT
Reason output NameSearchResults ST
ChargeLimit output NameSearchResults LIMIT

 


3. Building and Deploying a Simple Model

Using the completed model of the CICSAccts application you can query the CICS database by a customer’s last name. To build this model, you will:

  1. Connect to host using a login command list
  2. Create entities from host screens
  3. Create operations for host navigation
  4. Create recordsets for scrolling data
  5. Create tables for abstraction level queries
  6. Create procedures to retrieve data
  7. Test and deploy the model

 

Note: The CICSAccts application is a demonstration application. Although the navigation supported in the application is extremely limited, and the database consists of generic customer data for only eight fictitious customers, it is a useful tool for learning to create a model.


A. Connect to Host Using a Login Command List

You will use the Host Integrator Design Tool to configure a host connection profile and create a login command list.

Configuring the host connection profile

  1. To start the Host Integrator Design Tool, click Start > Programs > Attachmate Verastream > Host Integrator > Design Tool.
  2. Click File > New to open the New Model dialog box.



  3. Type MyModel in the Model Name field. This creates a connection profile to the CICS host. Accept the default model location.
  4. In the Settings box, click Browse and select IBM3270Model. This provides the appropriate default settings for session type (IBM 3270 Terminal), terminal ID (Model 2 24X80 Extended), and transport type (Telnet). The CICS demonstration host is configured for access on port 1097.

    Enter the following host connection information:

    Field Name Entry
    Host name or IP address localhost
    Port 1097
    Device (Leave blank)

  5. From the Settings menu, select Preferences. In the Preferences Setup dialog box, select the option When model file opened Connect to host. This configures the Host Integrator Design Tool to connect to the host automatically when the model is opened.
  6. Click File > Save MyModel.model.

You have now finished configuring the Design Tool to connect to the demonstration 3270 application (CICSAccts) running in the Verastream Host Emulator on the local machine over port 1097. Every time a new entity is created (host screen is accessed), the Design Tool will automatically note all operations (navigation through the host application). You will learn more about these terms and processes as you proceed through this demonstration.


About the Design Tool

The Design Tool is divided vertically into two sections or panes:

 

CICS application navigation tips

Use these navigation tips to negotiate the CICSAccts application example:


Creating a login command list

A login command list provides a quick and reliable login to a host. You can also use login commands to bypass a host login screen.

To create a command list to log on to CICS:

  1. If you're not already connected, click disconnect to connect to the model.
  2. Click Model > Record > Start Recording.
  3. Click in the Terminal Window and then press the Scroll Lock key (this is mapped to the host CLR by default).
  4. In the terminal window, type accts, and press Enter.
  5. Click Model > Record > Stop Recording.
  6. Select the Save as login command list option and click Save. The Command List Edit dialog box opens. You will use this dialog box to edit the login command list.

Editing the login command list

The CICSAccts demonstration application is run from the Verastream Host Emulator; to synchronize the Host Emulator login to the application, you need to add an additional wait command to the top of this recorded command list.

Note: To open the Command List Edit dialog box, click Model > Properties, and then click Edit.

To edit the login command list:

  1. Select the first command in the Commands field, WaitForCursorAtLocation, 1, 1, "5"
    Note: If the Row and Column values are not both 1, change the values to "1".
  2. Click Insert Insert, then point to Host Events, and click .Wait.
  3. With Wait "00:00:01" selected, click Move Up Move up to move this command to the top of the command list. Your commands should look like the command list in Figure 2.
  4. Click OK to close both the Command List Edit and Model Properties dialog boxes.


  5. Figure 2– Design Tool Command List Edit dialog box

 

Configuring the login command list to load automatically

The Design Tool can automatically execute this login command list whenever you connect to this model. To configure the login command list to load on connection:

  1. Click Settings > Preferences.
  2. In the Preferences Setup dialog box on the General tab, select the Execute login commands check box, and click OK.
  3. Save your model.

 

Testing the login command list

  1. On the tool bar, click connect to disconnect your current session.
  2. Click disconnect to reconnect and run the login command list. Each time you open the model, the Design Tool automatically connects and logs you into the host and displays the Main screen of the host application.

B. Create Entities From Host Screens

An entity is usually a single host application screen, such as the login screen or the main menu screen of an application. A model is made up of entities (host screens), and the attributes, recordsets, and operations associated with those screens.

Up to this point, you have recorded all navigation through the host application in the login command list. Since the end application does not access data from these initial screens, you do not have to configure each screen in the login sequence as an entity. The first screen you need to define is the Account File Menu screen.

To add a screen as an entity:

  1. When the first screen, Account File: Menu, appears after connecting to the host, click New Entity New Entity in the Entity Window. By default, the entity is named Entity_1.
  2. Change the entity name to Main.

 

Creating a pattern for entity recognition

A pattern is a model element that is used in the screen signature to identify a particular host application screen. Host Integrator uses patterns to distinguish individual entities. Select any static text on the screen, such as field labels, or screen headers and footers, to be designated as a pattern. Each pattern can include up to 259 characters

Tip: To help ensure that each entity has a unique identifier, it is a good idea to configure at least two patterns to define each entity, one at the top of the screen and one at the bottom.

To create patterns for the Main entity:

  1. In the Terminal Window, use the mouse to select the text: ACCOUNT FILE: MENU


    Figure 3- Select this text in the Terminal Window to create a pattern
  2. On the Pattern tab, click New Pattern New Pattern.
  3. By default, the pattern is named Pattern_1. Accept this default name.
  4. Click Apply.

The Design Tool has now recorded the position, properties, and signature parameters of the pattern. You can access and edit these settings on the Pattern tab.

Because it is good practice to define at least two patterns per entity, on most host screens you would select a second string of unique text to use as your second pattern. However, when you defined the requirements for the model, you realized that for this application you must take a different approach because the same host screen is used to both request and display customer information.

When you enter customer information on the screen (Figure 4), the data is returned in the blank area at the bottom of the screen (Figure 5). Compare Figure 4 to Figure 5; all of the text on the top half of the screen remains the same. It is difficult to assign a unique pattern on the first screen because it contains no static text that does not exist on the second screen.


Figure 4 - Entity 1 "Main"

Figure 5- Entity 2 "NameSearchResults"

Can you treat this as one entity? You could, but that would add complications when creating operations and recordsets.

The simplest solution is to create two entities and use an exclude; Host Integrator "recognizes" the first entity by the presence of specific text, and the second by the absence of that same text. To use an exclude, select a pattern that exists only on the second screen, and configure Design Tool so that if that pattern is not present it is, by default, accessing the first screen. Follow these steps:

To create a pattern using an exclude:

  1. In the Terminal Window, click in the SURNAME input area and type W (uppercase W). Press Enter. You are now on the second entity (the same screen as the first entity, but with data).
  2. Use the mouse to select the entire account information heading:

    Figure 6 – Select this text to create a second pattern.
  3. On the Pattern tab, click the New Pattern button. Accept the default pattern name, Pattern_2.
  4. At the bottom of the Pattern tab, select the Screen properties not present check box as part of the Definition.
  5. Click Apply.
  6. Click Yes to dismiss the pop-up warning message box.

When you use the Screen properties not present setting, Design Tool automatically initiates the creation of a new entity. Before continuing, you must complete the steps to add this second entity and identify it with patterns.

 

To add this screen (with data) as a new entity:

  1. Click the New Entity button in the Entity Window.
  2. Select the default entity name (Entity_2) and replace it with NameSearchResults.

To add patterns for the second entity, NameSearchResults:

  1. In the Terminal Window, use the mouse to select the text: ACCOUNT FILE: MENU

    Figure 7 - Select this text in the Terminal Window to create a pattern in the second entity.
  2. On the Pattern tab, click the New Pattern button. Accept the default name.
  3. Use the mouse to select the entire account information heading:

    Figure 8– Select this text to create a second pattern in the second entity.

    This is the same text you used when you identified the Main entity; however, in that instance you configured the Design Tool to make sure that the pattern was not present when identifying the Main entity. In identifying the NameSearchResults entity, you are configuring the Design Tool to verify the pattern is present.

  4. On the Pattern tab, click the New Pattern button. Accept the default name.
  5. Click Apply.
  6. When the Confirm Operation dialog box displays, click Discard. Then, click Yes to confirm the discard and close the dialog box. (Design Tool automatically creates navigational operations; however, you need to first identify attributes and fields.)

You have now created two entities, Main and NameSearchResults.

The next step is to identify the fields or attributes that you need on each entity. To return to the Main entity click Disconnect Connect on the toolbar, and then Connect Disconnect. to reconnect to the host, run the login script, and open the Main entity.


C. Configure Attributes for Data Entry and Retrieval

An attribute is a selected area on an entity that contains data that is accessible through the model. This area might be a data entry field or a text field that changes depending on the choices you made on prior screens. You use attributes to get and set data on entities. Create attributes only for those host fields that need to be accessed; give attributes meaningful names that identify their purpose.

To create attributes:

  1. On the Main entity, select the SURNAME field input area. (On block mode applications such as this 3270 application, you can double-click the field to select it.)

    Figure 9 – The defined area of Attribute_1
  2. Click the Attribute tab, then click New Attribute New Attribute to add this as Attribute_1.
  3. Rename Attribute_1 to LastName and if necessary:
  4. Repeat this process to include these attributes:
    Attribute Attribute Name Start (row, column) End (height, width)
    SURNAME LastName 5,17 1, 12
    FIRST NAME FirstName 5, 44 1, 7
    REQUEST TYPE RequestType 9, 22 1,1
    ACCOUNT AcctNum 9, 35 1,5
  5. Click Apply.

Next, add these same attributes to the NameSearchResults entity:

  1. To navigate to the NameSearchResults entity, on the Main entity, click the SURNAME input field and type W (uppercase). Press Enter.
  2. A Confirm Operation dialog box displays listing the commands needed to navigate to the NameSearchResults entity. Click Approve.
  3. Repeat the steps to add the same four attributes (LastName, FirstName, RequestType, AcctNum) on the NameSearchResults entity.
  4. Click Apply and save your model.

D. Create Operations for Host Navigation

Operations are typically used to navigate between entities, so they have an origin entity and a destination entity. You've already configured the Design Tool to auto-generate operations as you move through the host application. When you navigated from the Main entity to NameSearchResults, you approved the operation ToNameSearchResults.

So far, you have only navigated forward through the application. To move backwards by selecting the prior entity you need to create a return operation. This ensures entities can navigate both forwards and backwards in a model.

Open the drop-down list of available entities. Notice the icon preceding the Main entity selection. home entity. The house icon indicates the home entity. A red house indicates that you have not defined operations to access this entity from your current location.

 

To create a return operation:

  1. Click in the Terminal Window and press Enter.
  2. In the Confirm Operation dialog box, review the new operation, ToMain, and then click Approve.

To review the navigation operations, open the drop-down list in the Entity box. Both entity icons are now available. Select each entity and view the entity's Operation tab.

Note: If you click random keys while navigating, each key press is recorded in the operation. If you see unnecessary operations, use the Delete button to remove them from your operation command list.


E. Create Recordsets for Scrolling Data

Recordsets handle scrolling or tabular data. You create recordsets to manage dynamically changing data that spans several host screens. In the Design Tool, you create a recordset by defining the:

 

Defining the position and layout of the recordset

You are going to create a recordset from the data displayed in the list of records on the NameSearchResults entity.

  1. Select the NameSearchResults entity and click the Recordset tab.
  2. With the mouse, select the full scrollable area on the screen.
    Note: Do not include the column titles when you select the scrollable region.


    Figure 10 – The scrolling region of this screen is selected. When selected, the lines around this area will be green on your screen.
  3. Click New Recordset New recordset. (The Position tab should show the Top of the selection at Row 17, Column 2, and the Bottom at Fixed row, Row 22.)
  4. By default, the recordset is named Recordset_1. Change the name to AccountList in the Name box.
  5. Click Apply.

 

Defining the scrolling operation through the recordset data

You view the recordset data by using terminal keys to page down and scroll through the data. Navigational operations are defined within each recordset.

Adding a page-down operation

To define a page-down operation for the AccountList recordset in the NameSearchResults entity:

  1. Select the Operation tab of the NameSearchResults entity.
  2. From the Model menu, choose Record > Start Recording to record your operation.
  3. Click in the Terminal Window and press the Page Down key, which is mapped to host key PA2.
  4. Click Model > Record > Stop Recording.
  5. In the Stop Recording dialog box, rename the operation from ToNameSearchResults to PageDown. Click Save.
  6. In Step 3 several additional commands may have been recorded.

    This operation only requires these two commands:

    CheckOperationConditions
    TransmitTerminalKey rcIBMPA2Key

    If other commands are listed, delete them.

  7. Click OK to save and close the Operation Edit dialog box.

 

Using the page-down operation

After creating the recordset operation, you must tell Host Integrator when to use it. The Recordset Operations dialog box contains a predefined set of procedures that the Design Tool uses for specific operations. A page-down procedure displays an entire page of new data. You need to associate a specific operation with this page-down procedure.

To associate the new PageDown operation with the page-down procedure:
  1. From the Recordset tab, click the Operations button at the bottom left of the tab.
  2. On the Recordset Operations dialog box, open the Page down drop-down list.
  3. Select your PageDown operation from the list of options.
  4. Click Close, and then click Apply.

 

Stopping the page-down operation

Next, you need to communicate to Host Integrator when to stop scrolling through the NameSearchResults data. To do this, you first create a pattern so Host Integrator recognizes that the end of the data has been reached. Often a comment such as *END OF DATA* is used in this manner.

However, the CICS application does not display an end-of-data comment. Instead, you can configure Host Integrator to recognize the absence of the text, "THERE ARE MORE MATCHING NAMES," as an indication that it has reached the end.

To create the pattern:
  1. On the NameSearchResults entity, open the Pattern tab.
  2. Click in the Terminal Window, press Enter.
  3. In the Surname field, type W (uppercase W), and press Enter.
  4. Select the text: THERE ARE MORE MATCHING NAMES. Click the New Pattern button.
  5. Rename the pattern to MoreNames.
  6. Clear the Use in entity signature check box.
  7. Select the Screen properties not present check box.
  8. Click Apply.

Now that you have created the pattern, you must tell Host Integrator to use the MoreNames pattern to signal the end of the PageDown operation.

To set the MoreNames pattern as the termination parameter:
  1. Open the Recordset tab and click the Termination button at the bottom of the tab.
  2. Open the Scroll Down tab, clear the Scroll operation results in same recordset data check box in the Scroll termination criteria pane.
  3. Select Screen contains pattern, and then select the MoreNames pattern from the drop-down list.
  4. Configure the Exclude records on last screen option by selecting Read until __ blank records are found check box. Accept the default setting of 1.
  5. Click Close, then click Apply.

You can now successfully traverse and terminate the AccountList recordset.

 

Creating recordset fields

A field is a single piece of data in a recordset. Defining a field on a recordset is similar to defining an attribute on an entity. For the CICSAccts application, you need the customer's first and last name, middle initial, title, and address, as well as the reason and charge limit on their account.

To add fields to the AccountList recordset:

  1. From the Recordset tab, open the Fields tab.
  2. In the Terminal Window, select account number 20000 on the first row of data (the first row of data is used by default to define what data is contained in this column):


    Figure 11 – Defining the AcctNum field.
  3. On the Fields tab, click New Field New field. A new field called Rfield_1 is created. Rename it AcctNum.
  4. Select the entire surname field on the first row of the recordset. Click the New Field button. Rename it LastName.


    Figure 12 – Defining the Surname field.
  5. Use the data below to add and define the remaining fields.

    Select Default Name Rename to Start End
    WAGY RField_2 LastName 9 20
    MARK RField_3 FirstName 23 29
    T RField_4 MiddleInitial 32 32
    MR RField_5 Title 35 38
    116 BURNSIDE ST RField_6 Address1 41 65
    N RField_7 Reason 67 67
    1000.00 RField_8 ChargeLimit 72 79

  6. Click Apply and save your model.

F. Create Tables and Procedures for Abstraction Level Queries

You have now created a model of your host application that defines host screens as entities, screen data as attributes, and tabular data as recordset fields. You have also created operations that describe how to navigate from one entity to another. At this stage of the process, the model fully describes the host application layout.

Working with tables and procedures, which are interlocked functionally; tables are populated with data by a procedure, you can access the unstructured data in a way that resembles a structured database table.

Since Host Integrator tables do not contain data, but rather "organize" host data into a database-like view, the only way to access abstracted table data is through a procedure. Procedures define how Host Integrator locates, retrieves, updates, inserts, or deletes data when it fulfills a request from the client application.

The Web application developer needs to know only what procedure to run, along with the appropriate inputs and outputs; there's no need to know how the host application works. For more information, see Tables Overview in the online help.

To create a table:

  1. From the Model menu, click Tables.
  2. On the Introduction dialog box, select the Don't show me this dialog again check box and click Finish. You will not be using the Table Wizard to create this table.
  3. In the Tables dialog box, click New. The Create a new table or procedure dialog box displays, select Table and click OK.
  4. In the Name field, change Table_1 to Accounts.
  5. In the Description field, type Table of account information.
  6. Click Insert Column Insert column six times, to create Column 1 through Column 6. Columns identify the attributes and recordset fields that make up the table.
  7. Using the following chart, rename Column_1 through Column_6. For example, rename Column_1 LastName and so forth. You do not need to enter data in any of the other fields.

    Default Name Rename to
    Column_1 LastName
    Column_2 FirstName
    Column_3 MiddleInitial
    Column_4 Title
    Column_5 Address1
    Column_6 AcctNum

  8. Click Apply to save the Accounts table.

G. Create Procedures to Retrieve Data

Procedures retrieve data and populate tables.

To create a procedure that retrieves the account information:

  1. In the Tables dialog box, click New and select Procedure (using the Procedure Wizard). Click OK.
  2. In the Name field of the Procedure Wizard, type SearchByName.
  3. In the Description field, type Search by name. Verify that the Procedure type option is Select. Click Next.
  4. Identify the procedure parameter needed to manipulate and return host data and specify which attribute or field to use to filter the records:
    1. In the Filter Parameters dialog box, go to the LastName row and click in the empty Write parameter to cell. Open the drop-down list.
    2. Select Main.LastName from the drop-down list to write the filter parameter to the last name attribute on the Main entity.
    3. In the Required column, confirm that the Required check box for LastName is selected. A last name will have to be entered in order to proceed.
    4. Click Next.
  5. Choose the parameters that will be returned as output. The data to be returned is in the AccountList recordset on the NameSearchResults entity.
    1. In the Output Parameters dialog box, click in each Read parameter from cell and select the following data sources from the drop-down menu:

      Parameter Data Source
      LastName NameSearchResults.AccountList.LastName
      FirstName NameSearchResults.AccountList.FirstName
      MiddleInitial NameSearchResults.AccountList.MiddleInitial
      Title NameSearchResults.AccountList.Title
      Address1 NameSearchResults.AccountList.Address1
      AcctNum NameSearchResults.AccountList.AcctNum

      This maps the procedure fields with the data in the AccountList recordset on the NameSearchResults entity.

    2. Click Next.
  6. View the Summary, and click Finish to return to the Tables dialog box.
  7. Review the information in the Tables dialog box for the SearchByName procedure. You can expand Accounts to view the procedure.
  8. Verify that the Home entity is Main.
    This table begins and ends at the Home entity. Each procedure must have a home entity to ensure that queries and procedures begin from a known point in the host application.
  9. Click OK and save your model.

     



    Figure 13–SearchByName procedure details.

H. Test and Deploy the Model

Before you deploy your model, test it using these utilities:

Because the model you created is a simple, two-entity model, comparing the entities and identifying the traversal path is easy. But consider a model that contains hundreds of entities with a multitude of attributes and complicated navigation, and you can understand how these utilities become important debugging tools. However, even with a simple model, you will use two debug utilities, Procedure Test and SQL Test.

To run a procedure test:

  1. From the Debug menu, click Procedure Test. Since you have only one table and one procedure, they are selected by default.
  2. In the Procedure Filters box, type W (uppercase W)in the Value field (associated with the LastName filter.)
  3. Click Execute. Seven entries should be returned and displayed in the Procedure Outputs box.
  4. Click Clear and enter K (uppercase K) to test your procedure again.
  5. Click Execute. You should see one entry under Procedure outputs.
  6. Click Close.

To run an SQL test:

  1. From the Debug menu, click SQL Test.
  2. In the SQL statement box type the following SQL command:
    SELECT * FROM accounts WHERE lastname LIKE 'W'
  3. Click Resolve to resolve the SQL statement to a procedure.
  4. Click Execute. Seven records should be returned and displayed in the Output recordset box.
  5. Click Close and save the model.

Note: The Host Integrator supports a subset of the SQL 92 standard for SELECT, UPDATE, INSERT, and DELETE statements. Some of these commands are used in a slightly different manner. For more details, see SQL Syntax.

 

Extending Your Model with Event Handlers

Event handling extends the capabilities of Host Integrator models by interrupting the interpretation of a model and turning control over to user-supplied procedural code. For example, you can use event handlers to:

You can also use event handlers to increase Host Integrator error-handling capabilities. For example, you can add an event handler at the point an error occurs and then implement event-handler code that intercepts the error, takes control, and corrects the error.

Although event handlers are beyond the scope of this tutorial, you can read more about this powerful feature in About Event Handlers.

About Deploying Host Application Models

To move into production testing, you need to deploy your model to the Host Integrator Server that handles the communication between your custom application and the model, and between the model and the host application. When deploying models, use either:

 

Deploying MyModel.model

You are using your workstation as the development, testing, and production environments; therefore, you will deploy your model to the local Verastream Session Server, localhost:

  1. Open your model in the Design Tool.
  2. To deploy your model, click File > Deploy to Local Server.
  3. The dialog box informs you that you have successfully deployed your model. Click OK.
  4. Close the Design Tool.

4. Creating a Web Builder Project

After you have completed, tested, and deployed the model, you are ready to create a project from the Host Integrator model. For the CICSAccts example, you will use Web Builder to:

Web Builder generates projects ranging from simple screen-based rejuvenation to full procedure-based integration. A rejuvenation Web application uses the model's entities, attributes, and recordsets as the basis for creating the Web front end. An integration project uses procedures to create a Web application or component interfaces, which include Web services, JavaBeans, .NET class libraries, and Visual Basic ActiveX DLLs.

 

Generating a Web Application

You can use Web Builder to create a Web application that can be used either "out of the box" or customized by your Web application developer. Screen-based rejuvenation may be adequate for some projects, but, in this tutorial, you will use the model's procedures to integrate the CICSAccts application into a more sophisticated application, as well as to generate a Web service.

Note: The steps you follow to generate a project are the same on either a .NET or Java platform. Select the type of project you want to build based on your platform and whether you want to generate a Web application or component interface.

For CICSAccts, you will build a Java procedure-based Web application:

  1. To open the Web Builder in Windows, click Start > Programs > Attachmate Verastream > Host Integrator > Web Builder. You can open Web Builder in the Design Tool by clicking File > Web Builder.
  2. In Web Builder, click New to create a new project.
  3. Select Java Web Application as the type of project to create.
  4. Select MyModel as the Host Integrator model name.
  5. Enter MyModel_Application as the project name
  6. After you name your project, you have the option of customizing your Web application. You can choose from a variety of themes to tailor your Web application according to your particular needs. If you do not want to customize your Web application, move to Step 7.

    1. From the New Project dialog box, click Properties. The Project Properties dialog box displays.
    2. Select Java Web Application. In the right pane, three tabs display. Click Customization.
    3. From the Theme drop down list, select the adaptation you want to use to modify your Web application. Click to preview the theme before you select it.
    4. Click OK.
  7. Click Build.
  8. When the Build Project dialog box displays a BUILD COMPLETED message, your Web application will automatically run. (To run the project manually in the Web Builder, select your project and click Run.)
  9. Click Search by name and enter a W in the LastName text box, then click Select. The resulting Web page looks the one below. Close the application and Web Builder.


  10. Figure 14– Java Web client generated by Web Builder.

The Web application can be used as is, or you can customize the application to use a different corporate logo, colors, or display. See Customizing Verastream Web Applications for more information.

 

Generating a Web Service

You or other business program developers can access CICSAccts host data by means of a Web service. To generate Web services from your model, use the same steps as you did to create a Web application:

  1. In Web Builder, click New to create a new project.
  2. Select Java Web Service as the type of project to create.
  3. Select MyModel as the Host Integrator model name.
  4. Enter MyModel_Webservice as the project name and click Build.
  5. A Web client displays immediately after the Web service is generated. This provides an interface for you to test the Web service functionality. At the prompt, enter 1 to Execute SearchByName procedure, then type W to test the Web service results.



    Figure 16– Testing Web Service Functionality

  6. After completing your test, exit the application; then close the Build Project dialog box to return to Web Builder.

 


5. Deploying the Project to the Enterprise

In a work environment, after you have developed the new Web or client/server application and the application has been tested, you can deploy it to the enterprise using the customer’s preferred hardware platform and network configuration.

For specific details on deploying a project review:


Congratulations!

Using Verastream Host Integrator, you have created an easy-to-use Web application that accesses the CICSAccts host application. You have:

  1. Defined the business needs for the project.

    You need a clear understanding of the business problem to be solved by your solution.

  2. Developed the model requirements and mapped the data.

    In the "real" world, you would work with system administrators to understand the user's computing environment, programmers to learn what programming languages are preferred, and host application users to understand how the host application functions. This would lead to setting the model requirements and mapping the host application data. During this exercise, you were given the model requirements and mapping information.

  3. Built and deployed the model.

    Using the Design Tool, you created a model of the host application, which was automatically deployed to your local Host Integrator Server. You:

  4. Created a Web project using Web Builder.

    You generated a Web application to test the procedures in your model, and delivered this Web application as a simple front-end to the host application. You also generated a Web service to deliver to Web programmers for a more complex application that integrates host data through the model.

  5. Deployed the project to the enterprise.

    Because you did not move the CICSAccts application into production, you didn't have to perform this step.

Although your Verastream project will be more complex than this straightforward example, the steps you perform and the utilities you use are the same each time you create, deploy, and implement a Verastream Host Integrator model.

 

 

  Attachmate