Clear this check box if you want the Host Integrator to ignore the host prompt.
Clearing the Use host prompt check box has the same effect as selecting the Inhibit Handshake and Inhibit DC2 check boxes. Ignoring the host prompt forces the Design Tool to behave as though both inhibits are on, thus preventing handshaking. Over an X.25 network, this prevents communications problems caused by applications that use handshaking.
When the Use host prompt check box is cleared, the Design Tool always responds to a primary status request from the host that both Inhibit handshake and Inhibit DC2 are enabled. This can affect a host application that explicitly changes one of these inhibits.