Deploy To Test Server

You can use a Host Integrator server other than the one associated with your copy of the Design Tool as a test deployment environment.

Note: This option is limited to the same basic settings as the local server deployment; it does not include all the options available when deploying to a non-local server using the packagemodel and activatemodel commands.

The settings in the Deployment Options dialog box determine the host, the number of sessions, and the model variables that will be used when you deploy to the test server.

1. On the File menu, select Deploy to Test Server.
   
   
2. Type in the name of the Verastream server. This is a network name or IP address.
   
   Any Deployment Options you have defined for the model are used.
   
   
3. Click Deploy.
   
   
4. If you have not already saved your new model, the Save dialog box opens. Save your model by entering a model name in the File name box and clicking OK. If security is enabled, you will be prompted for a user name and password.
   
   The Design Tool displays a message indicating that the model was successfully deployed to the test Host Integrator Server.
   
   

Note: If you are redeploying an existing model, make sure that the Administrative WebStation is not in config mode.