Show Contents / Index / Search
Automatically Enable Serial Device-to-host Communications

You can enable serial device-to-host communications when you want a bidirectional device on a serial port (such as a printer or bar-code reader) to be able to send information to a host via Reflection. Most hosts automatically initiate serial device-to-host communications (via the Csi?9i control function).

To enable serial device-to-host communications automatically

  1. Open the Logging Settings dialog box.
  2. Under Log output to, select Serial device, and then click Configure.

    The Configure Serial Device Port dialog box appears.

  3. From the Port list, select the port to which your serial device is connected.

    If necessary, change the other settings for the serial connection to your device.

    The Configure button from the Terminal Setup Advanced Options dialog box is equivalent to the Configure button from the Logging Settings dialog box. You can use the button from either dialog box to configure your serial device port.

  4. Click OK.
  5. If the host application needs to send data to the serial device, from the Logging dialog box, clear the Printer check box. (You can omit this step if data flows only from the serial device to the host.)
  6. Click OK.

Related Topics

Manually Enable Serial Device-to-host Communications

Configure Serial Device Port Dialog Box

Logging Dialog Box

Logging Data