Show Contents / Index / Search

Configure non-FTP File Transfer

You can manually configure file transfer settings in the Transfer Settings dialog box. Any configuration you perform is saved with your session document.

However, using an automated preset configuration is recommended.

To configure file transfer

  1. Open a terminal session.
  2. Open the Transfer dialog box as follows:

    If you are using this "look and feel"

    Do this

    The Reflection button

    The Reflection Ribbon

    On the Session ribbon, from the Transfer group, click File Transfer.

    The Reflection button

    The Reflection Browser

    On the Reflection menu, choose Tools and then File Transfer.

  3. Click the Settings button, and configure the file transfer settings.
  4. For most situations, you can configure for file transfers by selecting a preset configuration in the Protocol tab (For example, AS/400).