Document\Connection

Item Name

Sub-group

UI Description

Baud

The rate at which Reflection transmits and receives data through the selected serial port.

ConnectionMethod

Determines how the session connects to the host (Network, Serial Port, Modem). This setting is used in conjunction with ConnectionType.

ConnectionType

Determines how the session connects to the host (Telnet, Secure Shell, Rlogin). This setting is used in conjunction with ConnectionMethod.

ConnectMacro

Run the connection action when the session initially connects to a host.

Host

The name of the host to which to connect.

ModemAdvancedSettingsDialog

The More Settings Modem dialog box. Restricting access to this setting limits user access to this dialog box when a session is configured for a modem connection.

ModemAreaCode

The area code (or city code) of the number being dialed.

ModemCountryName

The country of the number being dialed.

ModemDialingPropertiesDialog

The Phone and Modem Options dialog box. Restricting access to this setting limits user access to this dialog box when a session is configured for a modem connection.

ModemLocation

The current modem location. Modem locations are configured using the Control Panel tool.

ModemName

The type of modem being used.

ModemPhoneNumber

The phone number you want the modem to dial when connecting. The number must adhere to the rules of your modem.

ModemUserDialingRules

Set the TAPI modem dialer to add appropriate dialing prefixes to the number you are dialing, based on the current values of ModemAreaCode, ModemCountryName, and ModemLocation. When cleared, the modem dialer dials the phone number exactly as specified by ModemPhoneNumber.

NetworkAdvancedSettingsDialog

The More Settings - Network dialog box. Restricting access to this setting limits user access to this dialog box when a session is configured for a network connection.

NetworkSecurityDialog

The Security Properties dialog box. Restricting access to this setting limits user access to this dialog box when a session is configured for a network connection.

Parity

The parity for data transmission to and from the serial device on this port.

To use the multinational character set or 8-bit controls, Parity must be set to one of the values that offers 8-bit controls. If your communications link generates parity, and you set Parity to 8/None, multinational characters appear on your screen. In this case, set Parity to either 8/Even or 8/Odd.

Port

The communications port to which your target serial device is connected.

RunMacroAtReconnect

Run the macro when the session initially connects to a host, and every time it reconnects to the host.

SerialAdvancedSettingsDialog

The More Settings - Serial Port dialog box. Restricting access to this setting limits user access to this dialog box when a session is configured for a Serial Port connection.

SerialPort

The serial port to use when connecting to the host via a serial port connection.

SSHConfigScheme

The SSH configuration scheme settings to use to make a Secure Shell connection.

UserName

A name that identifies you or your PC to the host.