Show Contents / Index / Search

5250 Terminal Document Settings Dialog Box

Getting there

Connection

Host name/IP address

Identify the host to which you will connect. Type the host name, alias, or numeric IP address.

Note: Both IPv4 addresses (in the form 127.0.0.1) and IPv6 addresses (in the form 2001:0db8:3c4d:0015:0000:0000:abcd:ef12) are accepted.

Port

Type the host port or socket number that the session should use. This field accepts any number between 0 and 66,535 (default = 23).

Device name

Specify the terminal device name (also called the display name or the workstation ID) that the AS/400 should use for your session. If you leave this box blank, the AS/400 creates a device to use for your session.

The device name can be up to ten characters long. You can include any of the following characters as part of the value in the Device name box.

Character

Usage

*

Replaced by A, B, C, and so on to create a unique device name. If the entire alphabet is used, the generated device names continue with AA, AB, AC, and so on.

%

Replaced by P for printer sessions and S for display sessions.

=

Replaced by 1,2, 3, and so on to create a unique device name.

&COMPN

Replaced by the local workstation name, left-trimmed, if the generated name exceeds 10 characters.

&USERN

Replaced by the local user name, left-trimmed, if the generated name exceeds 10 characters.

+

Specifies right-trimming instead of left-trimming. Use with &COMPN or &USERN. This character can be placed anywhere in the string.

 

 

Notes:

  • You can use only one string in combination with these characters. If you use separated strings, the second string is dropped. For example, %MyDevice= is valid. However, %My=Device is not valid, and will be treated by the system as if it were &My=.
  • You cannot use both &COMPN and &USERN in the same string.
  • To have Reflection generate unique device names automatically based on the special characters described above, the Generate Device Names setting must be enabled. In printer sessions, this setting is off by default. To enable it, see the Generate Device Names topic.

Generate device names

When selected, Reflection automatically generates device names based on the value specified in the Device name field.

For example, if the specified device name is %ABC=, Reflection generates the device name SABC1 for a display session. If SABC1 is already in use, Reflection tries SABC2, SABC3, and so on.

Setting the device name to %123* generates the device name S123A for the first display session, S123B for the second session, and so on.

When cleared, if the specified device name is in use, the session does not connect.

Terminal

Model ID

Specify the terminal (also known as a display station) you want to emulate.

Host code page

Select the language and associated host code page to be used by your session. If you are not sure which language and code page to use, check with your system administrator. The default is US English, code page 037.

Keyboard map

Specify the keyboard map to use with this session.

Configure additional settings

Select to open a page from which you can customize host connection, terminal configuration, and other settings for this session.

When selected, the session does not auto-connect. This allows you to modify settings before connecting to the session.

Related Topics

Create a New Terminal Session

Configure Connection Settings Dialog Box (5250)

Generate Device Names

Editing a Host Code Page