HangUp Method

Hangs up the modem by sending the Hayes "+++" command to get the modem's attention, followed by the "ATH" hangup command.
Function HangUp() As ReturnCode
Dim instance As ITerminal
Dim value As ReturnCode
value = instance.HangUp()
ReturnCode HangUp()
This method does not guarantee that the modem has actually hung up. No error is returned if the method fails for any reason. After the modem is hung up, the port remains open; use the Disconnect method to close the port.

Valid only if Reflection is set to use the old modem dialer (UseModemDialerV5 = true).

See Also