InfoConnect for Unisys
Attachmate.Reflection.Emulation.OpenSystems Namespace / ITerminal Interface

In This Topic
    ITerminal Interface Properties
    In This Topic

    For a list of all members of this type, see ITerminal members.

    Public Properties
     NameDescription
     PropertyGets or sets a value indicating whether Reflection responds to host commands that are related to color table changes.  
     PropertyGets or sets a value indicating whether JIS escape sequences are allowed when other host character sets are selected.  
     PropertyGets or sets a string that is sent to the host when Reflection receives an Enq character from the host.  
     PropertyGets or sets a value indicating whether the answerback message (set with the AnswerBack property) is automatically sent to the host after a communications line connection.  
     PropertyGets or sets a value indicating whether to attempt to establish a host connection as soon as the current settings file is loaded.  
     PropertyGets or sets a sequence of action(s), such as running a macro, to run automatically before a connection is established.  
     PropertyGets or sets a value indicating whether a bell sounds when the ASCII bell character (decimal 7) is transmitted from the keyboard or received from the host.  
     PropertyGets or sets a block terminator character to be transmitted at the end of each block data transmission.  
     Property

    Gets or sets a value indicating whether Reflection caches the user name entered for a Secure Shell session.

     
     PropertyGets or sets a value indicating whether the character set translation state is enabled.  
     PropertyGets the IP address for a connection to a Citrix host.  
     PropertyGets the PC name returned by a Citrix host.  
     PropertyGets the Username value for a Citrix connection type.  
     PropertyGets or sets a value indicating how Reflection handles the display memory when you disconnect from the host.  
     PropertyGets the current DOS code page.  
     PropertyGets or sets a sequence of action(s), such as running a macro, to run automatically after a connection is established.  
     PropertyGets the error number that describes the specific cause of the most recent general connection failure (only when the last returned error has the value ErrConnectionError).  
     PropertyGets the text string that describes the specific cause of the most recent general connection failure (only when the last returned error has the value ErrConnectionError).  
     PropertyGets the integer value that uniquely identifies the current connection.  
     PropertyGets the IConnectionSettings object.  
     PropertyGets or sets a value indicating whether the Reflection status bar displays the length of time you have been connected to a host.  
     PropertyGets or sets the connection type.  
     PropertyGets the ContextMenus object.  
     PropertyGets or sets the application ID to use for DASO (Digital Certificate Access Server Automated Sign On) support.  
     PropertyGets the pass ticket for DASO (Digital Certificate Access Server Automated Sign On). This field will be empty until a successful call to GetDASOPassTicket is executed.  
     PropertyGets the session name that is used for DASO (Digital Certificate Access Server Automated Sign On). The session name and DASO application ID are used by the DASO server when mapping the current user to RACF logon credentials for host access.  
     PropertyGets the RACF USERID for DASO (Digital Certificate Access Server Automated Sign On). This field will be empty until a successful call to GetDASOPassTicket is executed.  
     PropertyGets or sets whether Reflection translates characters from the host to the PC, and vice versa, using the current translation table.  
     PropertyGets or sets whether Reflection uses default settings appropriate to a UNIX or OpenVMS host.  
     PropertyGets or sets the default printer to which Reflection sends printer output.  
     PropertyGets or sets how Reflection responds to a primary device attribute request from the host (usually when logging on).  
     PropertyGets or sets a value indicating whether Elf Autochem terminal emulation is enabled.  
     PropertyGets or sets a value indicating whether Reflection uses a form of handshaking called Enquire Acknowledge (EnqAck).  
     PropertyGets or sets a value indicating how Reflection responds if the ENTER key is pressed when not connected to a host.  
     PropertyGets the FileTransfer object.  
     PropertyGets or sets a value indicating whether Reflection interprets character codes in certain host character sets.  
     PropertyGets or sets the destination of graphics when you print using the ReGIS hard copy command.  
     PropertyGets or sets a value indicating whether the onscreen graphic is periodically updated from the offscreen graphic.  
     PropertyUse this property to match Reflection to the capabilities of a digital printer with regard to aspect ratio, horizontal grid size, background printing, and color printing.  
     PropertyGets or sets a value indicating whether the graphics output cursor is displayed.  
     PropertyGets or sets how graphics images are printed.  
     PropertyGets or sets a value indicating whether sixel images are scrolled.  
     PropertyGets ors sets which terminal is emulated, and how many shades or colors are available in ReGIS.  
     PropertyGets or sets a value indicating whether the column in which the cursor is located remains in the terminal window regardless of how the terminal window is resized, or which screen font size is used.  
     PropertyGets or sets a value indicating whether the horizontal scroll bar is visible.  
     PropertyGets or sets the host character set that Reflection uses when transmitting and receiving characters.  
     PropertyGets or sets the name and location of the host description file that is used by the GetHostElement method.  
     PropertyGets or sets the file path for the file that is used to populate the Host name/IP Address Drop-down list on the Create New VT Document dialog box.  
     PropertyGets or sets the current host status line display.  
     PropertyGets or sets the host trigger character value.  
     PropertyGets the instance ID of the control. (Inherited from Attachmate.Reflection.Framework.IControl)
     PropertyGets a value indicating whether Reflection is connected.  
     PropertyGets a value indicating whether the data carrier signal is high. Relevant only for serial connections.  
     PropertyGets a value indicating whether graphics is supported.  
     PropertyGets or sets a value indicating whether WinMASS software support is enabled.  
     PropertyGets the KeyboardMapper object.  
     PropertyGets or sets a value indicating whether the local computer "echoes" typed characters directly to the screen.  
     PropertyGets or sets a value indicating whether data logged by the terminal is sent to the currently configured serial device.  
     PropertyGets the Macro object.  
     PropertyGets or sets a value indicating whether macrograph reporting is enabled.  
     PropertyGets or sets how Reflection responds to a NUM LOCK key press on the PC when it is mapped to emulate the action of a terminal key.  
     PropertyGets the MouseMapper object.  
     PropertyGets or sets the appearance of the mouse pointer in the terminal window.  
     PropertyGets or sets the name of the control. (Inherited from Attachmate.Reflection.Framework.IControl)
     PropertyGets or sets the set of character translations that occur between the local computer and the host in 7-bit mode.  
     PropertyGets or sets a value indicating whether the translations specified by the NationalReplacementSet property are performed.  
     PropertyGets or sets a value indicating whether Reflection is in remote mode or local mode.  
     PropertyGets or sets a value indicating whether Digital terminals reset national replacement mode when a soft reset occurs.  
     PropertyGets or sets a value indicating whether Reflection processes incoming characters between calls to Reflection methods.  
     PropertyGets or sets how Reflection handles invalid keystrokes.  
     PropertyGets the Productivity object.  
     PropertyGets or sets a value indicating whether QuickPad controls display tooltips.  
     PropertyGets or sets ReGIS Graphics mode.  
     PropertyGets or sets the size of the buffer reserved for caching ReGIS graphics.  
     PropertyGets or sets how ReGIS graphics are handled.  
     PropertyGets or sets a value indicating whether the ConnectAction sequence is re-run after a session is reconnected.  
     PropertyGets or sets a save state for the scrolling region.  
     PropertyGets or sets whether Reflection saves the user name when you save your settings files or record a connection macro.  
     PropertyGets or sets a close option, which indicates how to handle the save action when closing the control.  
     PropertyGets the Screen object.  
     PropertyGets or sets a value indicating whether a SHIFT, CTRL, or ALT key press sends an escape sequence and, if the key is pressed in conjunction with other keys, prefixes the escape sequence to outbound data, in VT-UTF8 emulations.  
     PropertyGets or sets the serial port on the PC that is used as the terminal serial device port.  
     PropertyGets or sets the configuration parameters for the currently configured serial printer port.  
     PropertyGets or sets a value indicating whether data received from the currently configured serial device port is sent to the host.  
     PropertyGets the session document file path. (Control properties are saved in session document files.) (Inherited from Attachmate.Reflection.Framework.IControl)
     PropertyGets or sets the maximum allowable number of simultaneous VT-MGR sessions.  
     PropertyGets or sets the maximum allowable number of simultaneous Rlogin sessions.  
     PropertyGets or sets the maximum allowable number of simultaneous SecureShell sessions.  
     PropertyGets or sets the maximum allowable number of simultaneous Telnet sessions.  
     PropertyGets or sets the visibility of the status bar. This setting is only relevant when the workspace user interface mode is set to Classic. (This setting does not apply to Classic MDI mode.) The default is true.  
     PropertyGets or sets the visibility of the menu and toolbar. This setting is only relevant when the workspace user interface mode is set to Classic. (This setting does not apply to Classic MDI mode.) The default is true.  
     PropertyGets or sets which Digital UPS character set that is used when SET HOST-CHARACTER-SET is set to a double-byte character set.  
     PropertyGets or sets the saved connection that is used when the StartupAction property is set to UseSavedConnection.  
     PropertyGets or sets the text displayed on the status bar.  
     PropertyGets or sets the current status line text.  
     PropertyGets or sets the Telephony Application Programming Interface (TAPI) that Reflection uses to connect the PC to telephone services.  
     PropertyGets or sets how beeps sound.  
     PropertyGets or sets the terminal that Reflection is to emulate.  
     PropertyThis is an internal property used to determine the context of this terminal object usage. This is set to true if this terminal object is being used in a Terminal User Control context.  
     PropertyGets or sets whether Reflection uses the ASCII or ANSI character set.  
     PropertyGets the Theme object.  
     PropertyGets the time (in seconds) during which you have been connected.  
     PropertyGets or sets the string that appears in the title bar. This string is only relevant when the workspace user interface mode is set to Classic SDI. The caption length maximum value is 260 characters. The default is &f - &n  
     PropertyGets or sets a value indicating the name of the trace file that is created when Trace Session Start is true.  
     PropertyGets or sets the location of the folder where Reflection saves trace files that are created when Trace Session Start is true.  
     PropertyGets or sets a value indicating whether the Reflection Trace utility to begin tracing the moment Reflection starts.  
     PropertyGets the object used to map actions to the user interface control and to retrieve the action sequence from the user interface control.  
     PropertyGets or sets how Reflection communicates with a host using the IPv6 and older IPv4 protocols.  
     PropertyGets or sets which modem dialer is used to make modem connections.  
     PropertyGets or sets data for the duration of the current Reflection session.  
     PropertyGets or sets a value indicating whether the host can alter the definitions of the user-defined keys.  
     PropertyGets or sets a value indicating whether certain features can be changed by the host.  
     PropertyGets the Common VB Project (VBA use only)  
     PropertyGets the VB Project (VBA use only)  
     PropertyGets the version of the terminal session control.  
     PropertyGets or sets a value indicating whether the vertical scroll bar is visible.  
     PropertyGets or sets a value indicating whether Reflection switches back and forth automatically between Tektronix and VT terminal emulation when it receives VT640-compatible control characters from the host.  
     PropertyGets or sets VT340 Tektronix state.  
     PropertyGets or sets the device control string state.  
     PropertyGets or sets the number of lines displayed on screen.  
     PropertyGets the IP address returned by Windows Terminal Server (WTS).  
     PropertyGets the PC name returned by Windows Terminal Server (WTS).  
     PropertyGets the user name returned by Windows Terminal Server (WTS).  
     PropertyGets or sets a value indicating whether the terminal accepts nulls from the host(for Wyse terminal emulation only).  
    Top
    See Also