1100-1199 (DBEnterprise)

1100 DBM_IO_ERROR
I/O error on filename: description

Enterprise Server encountered an I/O error on the indicated file.

1101 DBM_OPENERROR
Open error on filename: description

Enterprise Server was unable to open the indicated file. This is not necessarily a fatal error. For example, there are no cache files present the first time Enterprise Server is run to cache a particular source.

1102 DBM_READERROR
Error reading from filename: description

Enterprise Server encountered an error trying to read the indicated file.

1103 DBM_WRITEERROR
Error writing to filename: description

Enterprise Server encountered an error trying to write the indicated file.

1104 DBM_BADMEMALLOC
Allocation of number bytes failed

The operating system could not provide the requested number of bytes of memory from the heap.

1105 DBM_BADMEMDEALLOC
Deallocation of number bytes failed

The operating system could not return the specified number of bytes of memory to the heap.

1106 DBM_TOOMANYSELECTS
Selection limit maxselects exceeded: numselections

The DATABridge Client tried to select more data sets than the maximum allowed.

1107 DBM_WINSOCK
WinSock initialization failure. description

Windows Sockets couldn't be initialized. This means TCP/IP is unavailable

1108 DBM_COMMANDLINE
Invalid command line parameter: 'parametername'

Check the spelling of the parameter you are entering, and make sure that parameter is valid for the command.

1109 DBM_PROTOCOLLEVEL
Client protocol level (clientlevel) must be at least minimumlevel

The DATABridge Client's protocol level is obsolete and must be upgraded. To access Enterprise Server, the client's protocol level must be the equal to or greater than the specified minimumlevel.

1110 DBM_FILTERFAILED
Filter routine failed

An error was encountered in the filtering routines. Remove the associated filter files from the Enterprise Server Config directory and rerun the client:
sourcename(updatelevel).filter
If the error persists, contact Attachmate Technical Support.

1111 DBM_AUDITCLOSE
Trouble closing audit file afn

Enterprise Server encountered an error while trying to close a cache file.

1112 DBM_NODSNAME
DBSelect requires data set name (#structurenum)

The data set selection Remote Procedure Call from the client did not include a data set name, which is required. structurenum is the DMSII structure number.

1113 DBM_NOBASE
Source does not have a base

Enterprise Server could not find the base source associated with a local source. Delete the local source, add the base source, and then create the local source from it.

1114 DBM_AUDITCORRUPT
Audit file afn corrupted

A cached audit file is corrupted. Remove it and any later cached audit files for that source and then run Enterprise Server with the CACHE command to rebuild them.

1115 DBM_DATACORRUPT
Corrupted data in data set block blocknum

A file block in an ORDERED data set is corrupted. Report this to your DMSII database administrator.

1116 DBM_BADLABEL
Incorrect MCP label headerfield = 'value' on drive drivenum unit unitnum

The disk label is incorrect for an MCP disk. Enterprise Server will not try to use that drive for direct disk cloning.

1117 DBM_FILTERMISMATCH
Structure #structurenumber format level mismatch: Filter (filterlevel) vs. record (datasetlevel)

The loaded filter has a different data set format level than the record currently being filtered. Remove the associated filter files from the Enterprise Server Config directory and rerun the client:

sourcename(updatelevel).filter

If the error persists, contact Attachmate Technical Support.

1118 DBM_NOTCACHED
Source sourcename does not have a cache

You attempted to use the Enterprise Server cache command for a source that does not have caching set up yet. This error may appear in the log the first time the source is cached but Enterprise Server will continue creating the cache files.

1119 DBM_AUDITNOTOPEN
Audit file afn is not open

The cached audit file was expected to be open but was not. If this error persists, contact Attachmate Technical Support.

1120 DBM_INCOMPATIBLE
Unrecognized file type version in cachefile

The cache file was created by an unsupported version of Enterprise Server or the file is not a cache file at all. Remove the file(s) from the cache directory before reprocessing.

1121 DBM_MISSINGAUDLOC
Audit location not found: AFN afn, ABSN absn, Inx index

The client specified an audit location that was missing or incorrect. Either correct the client control tables or reclone the database.

1122 DBM_ALTERUNSUPP
DBEnterprise can not clone an ALTERed data set: datasetname

Enterprise Server cannot clone altered data sets that require a REFORMAT routine. These data sets require special formatting routines on the mainframe, so they can be cloned only by the DATABridge Host software (unless you create a user-written .dll to perform the reformatting).

If there is an altered data set that you don't need in one of your local (filtered) Enterprise Server sources, right-click it and select Exclude all rows. The red square appears in the data icon, indicating that it will be omitted from replication.

1123 DBM_NOUNIT
Family familyname has no local disk units

Enterprise Server does not have visibility to the disk units comprising the indicated family name. It will not use direct disk cloning to access the data on that family.

1124

This number is currently not used.

1125 DBM_READCHECKSUM
Checksum error reading data set

The block checksum in a data set was incorrect and therefore the data in the block is suspect. Notify your DMSII database administrator. Enterprise Server will not use direct disk cloning to process this data set.

1126

This number is currently not used.

1127 DBM_CONFIGDIRERROR
Unable to access configuration directory. Please use setup.exe to install DBEnterprise

The Config directory is created by Enterprise Server during a successful installation. Reinstall Enterprise Server to create the directory and the associated registry keys.

If the registry keys were incorrect and the directory is still on disk, the setup program will preserve the sources you have already defined.

1128 DBM_MISSINGCONFIG
Unable to access configuration file 'filename'

Make sure that the configuration text file you are trying to import is in the Enterprise Server Config directory.

1129 DBM_CONFIGERROR
Errors in configuration file filename

Review the configuration log file to determine where the error occurred.

1130 DBM_NOCLIENTIP
Unable to determine client IP address

Enterprise Server was unable to retrieve the IP address associated with a specified host name. The operating system was unable to reach a DNS to convert the host name to an IP address. This might be due to firewall restrictions.

1131 DBM_BASEUNSELECTED
Virtual data set datasetname is derived from datasetname, so they must be selected together

You must select both of the specified data sets. To include both of the data sets in a local source, right-click and select Include all rows for each data set. The green square appears in the data icon, indicating that it will be included in replication.

The DATABridge Client must select both data sets during replication. For example, you cannot clone just the virtual data set or just the data set it is derived from.

1132 DBM_AUDITLEVEL

Audit file afn audit level auditlevel is not supported

The audit file that Enterprise Server reads from the MCP server has an unsupported audit level and therefore can't be interpreted properly. Enterprise Server will try to request the audit data from DBServer.

1133 DBM_INPUT_INTERRUPT
Host 'hostname' interrupted data transmission

The specified host transmitted a new request before Enterprise Server finished responding to the previous request. This caused Enterprise Server to discard the rest of the previous response. This error could indicate problems in the network configuration or hardware.

1134

This number is not currently used.

1135 DBM_QUIT_ENTERPRISE

Operator terminated programname

Someone stopped Enterprise Server. It terminated at the first quiet point after receiving the quit command. If you run the DATABridge Client again it will begin at that quiet point

1136 DBM_MISSINGFILTER

Unable to load filename filter for update level updatelevel

The update level stored in the filter did not match the update level number in the filename. If this is a fatal error, delete filename and Enterprise Server will regenerate it the next time you run the DATABridge Client.

1137 DBM_NOSOURCEINFO

Unable to load sourceinfoname source information

Enterprise Server was unable to find the source information file for the requested source. The source information file should be in the Config folder and have the file extension ".source". Correct the source name if it is in error. Otherwise, use Enterprise Server to define it.

1138 DBM_PROCESSERROR

Unable to start description

Enterprise Server was unable to start a process or thread. It will not be able to use direct disk cloning (or whatever the description indicates).

1139 DBM_UNSUPPORTED

Unsupported function

The requested RPC is not supported in the current release of Enterprise Server. This can occur in some situations with "cascading" Enterprise Server.

1140 DBM_MISSINGDIR

Unable to change to directory directoryname

Either the directory is missing or Enterprise Server does not have access rights to change to it.

1141 DBM_XMLERROR

XML parser error: description

The flat file schema file had syntax or semantic errors. Correct the schema file.

1142

This number is not currently used.

1143 DBM_MISSINGFILE

Unable to find filename (reason)

A necessary file is missing. Restore the file or regenerate it.

1144 DBM_NOLOG

Fatal error: Unable to open a log file for functionname

Enterprise Server was unable to create a log file in the Logs subdirectory. Either the subdirectory is missing or corrupted or out of space. Enterprise Server will not continue if it can't write a log file.

1145 DBM_EOF

Unexpected EOF reading from filename

Enterprise Server encountered the end of the input file before it found data it expected to be there. If the filename is LastSchema.txt, make sure that it contains a valid number.

1146 DBM_BADUPDATELEVEL

Update level requested (updatelevel) > LastSchema update level (currentupdatelevel)

A flat file "audit" or clone subdirectory requires a schema level greater than the current schema level, which is specified in the LastSchema.txt file. Provide a schema for the desired update level and change the LastSchema.txt file to contain the new level.

1147 DBM_WRONGLEVEL

Update level is schemaupdatelevel not clientupdatelevel

The flat file schema update level is schemaupdatelevel but the DATASOURCES table in the client database had update level clientupdatelevel. You must provide the proper flat file schema or redefine and reclone the client database.

1148 DBM_SQLINIT

SQL ODBC initialization failed

When Enterprise Server tried to process the VALIDATE command it was unable to access ODBC. Make sure that ODBC is supported in your Windows operating system.

1149 DBM_SQLLOGINFAILED

SQL Server login failed

The username/password was missing or incorrect on the VALIDATE command. Make sure that the username is valid for the Client database.

1150 DBM_SQLNODB

Unable to connect to database 'databasename'

Enterprise Server cannot connect to the DATABridge Client database. Verify that the Client, server, and relational database are running.

1151 DBM_SQLAPPEND

Unable to append SQL text 'text'

While constructing an SQL command, ODBC returned an error. If this error persists notify Attachmate Technical Support.

1152 DBM_SQLEXEC

Unable to execute SQL command: command

The SQL command failed probably due to a syntax error or security restrictions. If the command has a syntax error, notify Attachmate Technical Support. Otherwise correct the problem and rerun the command.

1153 DBM_SQLFREEFAIL

SQL Free Statement failed

The SQL Free command failed. If this error persists, notify Attachmate Technical Support.

1154 DBM_SQLPREPFAIL

SQL Prepare Statement failed for: statement

The SQL Prepare command failed. If this error persists, notify Attachmate Technical Support.

1155 DBM_SQLFETCHFAIL

SQL Fetch failed for: statement

The SQL Fetch command failed. If this error persists, notify Attachmate Technical Support.

1156 DBM_SQLBINDFAIL

SQL variable bind failed

The dbbind function failed when trying to associate local variables to SQL columns. If this error persists, notify Attachmate Technical Support.

1157 DBM_SQLCONVERT

SQL data conversion failed

Enterprise Server was unable to convert an SQL variable to a text string for comparison with a text file. If this error persists, notify Attachmate Technical Support.

1158 DBM_SQLTYPE

Unexpected SQL data type: datatype

The VALIDATE command encountered an SQL variable type that is not currently supported in Enterprise Server. If you need this data type, contact Attachmate Technical Support with this error for a possible new feature enhancement.

1159 DBM_NODATAITEMS

No data items found for 'datasetname' in source 'sourcename'

This can occur when all of the data items were filtered out by DBServer (via the DATABridge Support library), or that the local filter has filtered out the data items.

1160 DBM_SQLNOROW

Table 'tablename' key 'keyvalue' row not found for record number %recnum

The VALIDATE command read a record from the flat file but no matching row was found in the client database. Most likely the record was filtered out.

1161 DBM_DATAMISMATCH

Table 'tablename' key 'keyvalue' data mismatch for record number recnum, offset offset

The VALIDATE command has found a mismatch between the record in the input text file and the row that was stored in the relational database. Report this to Attachmate Technical Support.

1162 DBM_SQLDUPS

Table 'tablename' key 'keyvalue' duplicate rows

The specified key was found in more than one row in the specified table. Check to see that the index in the Client database is UNIQUE. You will probably have to reclone the table after the problem is corrected.

1163 DBM_NOCONNECTION

Unable to connect to server servername at port portnumber

This can occur in the following circumstances:

The destination server is down.

The server name or IP address was entered incorrectly.

Server access is prohibited by a firewall.

1164 DBM_SOCKINITERROR

Winsock initialization failed

This is a Windows error indicating that there is a problem with TCP/IP.

1165 DBM_SOCKOPENERROR

Error opening communication socket

Enterprise Server was unable to establish a TCP/IP connection with the remote host (either DBServer or a DATABridge Client). Make sure the remote host is still responding to TCP/IP requests.

1166 DBM_SOCKCLOSEERROR

Host 'hostname' closed communication socket

Communication may have been interrupted on the specified host. This error occurs when the remote process terminates abnormally, such as a Ctrl-C on the DATABridge Client or a DS on DBServer. Check the host, make sure it is running, and then try again.

When tracing is enabled in Enterprise Server, the log will contain these messages when the Client or DBServer disconnects. If replication is complete these messages can be ignored.

1167 DBM_SOCKWRITEERROR

Error sending network message

This message indicates a problem sending messages on the network. Replication will terminate immediately. Usually this means the remote process has terminated abnormally.

1168 DBM_SOCKREADERROR

Error reading network message

This message indicates a problem reading messages on the network. Replication will terminate immediately. Usually this means the remote process has terminated abnormally.

1169 DBM_SEQUENCEERROR

Message sequence error (expected requestnum but received responsenum)

The response from the remote process has a sequence number different from the last request sent to it. This could indicate network errors or messages leftover from a previous replication run.

1170 DBM_BADPROTOCOLLEVEL

Protocol level (DBServerlevel) must be at least minlevel

The DBServer protocol is too low to be compatible with Enterprise Server. A new release of the DATABridge Host software must be installed.

1171 DBM_BADUPDATETYPE

Unrecognized update type: updatetypenum

The DBServer has sent an update containing an unrecognized update type in the UpdateInfo. If this persists report it to Attachmate Technical Support.

1172 DBM_INTERNALERROR

Internal software error: description

Contact Attachmate Technical Support.

1173 DBM_BADSOURCETYPE

Invalid source type (sourcetypenum) for sourcename

The source information found in sourcename.source contains an unrecognized source type number. Source types can be Remote, File, or Local. The source information file has been corrupted. Remove it and use Enterprise Server to create it.

1174 DBM_NOCLIENTHOSTNAME

Unable to determine client host name for ipaddress

The operating system is unable to retrieve the host name associate with an IP address. Typically this means the reverse-DNS is not accessible. Contact your network administrator.

1175 DBM_NOTINSTALLED

Please use setup.exe to install DBEnterprise

You are attempting to use an Enterprise Server feature that is not successfully installed.

1176 DBM_PRUNE

Tree item description removed

This is a status message informing you that the source you selected to remove was removed successfully.

1177 DBM_MIRRORDISABLED

Audit Mirroring is not enabled for sourcename

Audit mirroring is disabled because the Mirroring parent directory option is blank.

1178 DBM_SHORTREAD

Audit read size (length) too short for block

The amount of data read from the audit file is less than the declared size of the audit block. The entire audit block has to be readable in order to process it. Enterprise Server will automatically retry the read after a brief waiting period. If this error persists, notify Attachmate Technical Support.

1179 DBM_BLOCKTOOLONG

Audit block size (length) exceeds max (maxlength)

The value in the audit block size field exceeds the maximum size declared in the DASDL. Usually this error indicates that data read is not really an audit block, just leftover data on disk. Enterprise Server will automatically retry the read after a brief waiting period. If this error persists, notify Attachmate Technical Support.

1180 DBM_ABSNMISMATCH

Block first ABSN (absn) not = dup ABSN (dupabsn)

The ABSNs in the current audit block do not match. An audit block contains its ABSN in two places for integrity checking. Usually this indicates that the audit block has not been completely written yet. Enterprise Server will automatically retry the read after a brief waiting period. If this error persists, notify Attachmate Technical Support.

1181 DBM_ENCRYPTION

Username/password encryption error: errormsg

The Windows encryption routine encountered the error identified by errormsg when encrypting the username and password.

1182 DBM_DECRYPTION

Username/password decryption error: errormsg

The Windows decryption routine encountered the error identified by errormsg when decrypting the username and password.

1183 DBM_LOGONFAIL

Logon to user 'username' failed

The Windows logon using username and password failed. This error occurs when Enterprise Server attempts to use an invalid username/password pair. Correct the username and password in the appropriate configuration dialog box.

1184 DBM_AUDCHECKSUM

Checksum error in Afn afn Absn absn sector seg

The computed checksum and the stored checksum for an audit block do not match. This error indicates this audit file has experienced some type of I/O error. Enterprise Server will automatically retry the read after a brief waiting period. If this error persists, notify Attachmate Technical Support.

1185 DBM_ADDRESSCHECK

Address Check error in auditfile sector seg found address

The audit block read at the specified sector has an AddressCheck value of address, when sector was expected. This error indicates this audit file has experienced some type of I/O error. Enterprise Server automatically retries the read after a brief waiting period. If this error persists, notify Attachmate Technical Support.

1186 DBM_NEED_RELINK

Need to relink to user library (dll)

Not currently in use.

1187 DBM_INVALID_JULIAN

Invalid Julian date (YYYYDDD): date

The date conversion routines received a request to convert a Julian date but the supplied date was not a valid Julian date.

1188 DMB_INVALID_GREG

Invalid Gregorian date (YYYYMMDD): date

The date conversion routines received a request to convert a Gregorian date but the supplied date was not a valid Gregorian date.

1189 DBM_INVALID_PARAM

Invalid type parameter 'param'

The parameter value was not legal for the indicated parameter. Correct the parameter value and try again.

1190 DBM_SERVER_FUNCTION

DBServer protocol level does not support RPC function

A remote procedure call (RPC) was attempted for a function that is not supported by the attached DBServer. Upgrade DBServer (DATABridge Host software) to a later release and try again.